SemiMedia SemiMedia
  • Breaking News
  • MarketWatch
  • Distribution
  • Manufacturer
  • Video
  • About us
Home › Manufacturer › Infineon release the industry’s first USB 10 Gbps peripheral controller
  • 0

Infineon release the industry’s first USB 10 Gbps peripheral controller

SemiMediaEdit
December 6, 2023

December 6, 2023 /SemiMedia/ -- Infineon announced that it has expanded its EZ-USB™ family of programmable USB peripheral controllers with the EZ-USB FX10, which provides fast connections for USB 10Gbps and LVDS interfaces, increasing the total bandwidth by 3% compared to the previous generation. times.

The EZ-USB FX10 is equipped with dual ARM® Cortex®-M4 and M0+ core CPUs, a 512 KB flash, a 128 KB SRAM, a 128 KB ROM, and seven serial communication blocks (SCBs). It also includes a cryptography accelerator and a high-bandwidth data subsystem. The high-bandwidth data subsystem enables direct memory access (DMA) data transfers between LVDS/LVCMOS and USB ports at speeds of up to 10 Gbps. Data transfer is supported by an additional 1 MB of SRAM for USB data buffering. The peripheral controller provides USB-C connector orientation detection and flip-mux functionality, eliminating the need for external logic. This comprehensive feature set makes the EZ-USB FX10 an ideal choice for developers looking for a powerful and adaptable USB controller.

The EZ-USB FX10 requires a smaller PCB footprint and thus helps to optimize the BOM. The 10 x 10 mm² BGA package makes it ideal for space-constrained applications. Additionally, it supports USB-C direct connection without a high-speed signal multiplexer, which simplifies the design process. The Quick Start Development Kit includes firmware and a configuration tool for easy integration. The EZ-USB FX10 DVK (development kit) also comes with a standard FPGA Mezzanine Card (FMC) connector for easy connection to field-programmable gate array (FPGA) boards and an all-in-one programming and debugging accessory board. The controller comes with a comprehensive set of application notes for hardware and software design, enabling developers to create high-performance devices for various applications.

The EZ-USB FX10 peripheral controller in a 10 x 10 mm² BGA package will be available in the fourth quarter of 2024. Engineering samples are available now. For more information, please visit www.infineon.com/ez-usb-fx10.

Related

electronic components news Electronic components supplier Electronic parts supplier Infineon
NAND prices increased by 30%
Previous
Insider: TSMC lowers 2024 capital expenditures
Next

All Comments (0)

Back
No Comment.

Top Post

Fire broke out at AKM factory in Japan
Qualcomm ranked first in the world's top ten IC design companies
Mouser Electronics expands to the Philippines with local customer service center
Analyze the key factors and prospects of electronic components shortage from the perspective of wafer industry
What is the root cause of the decline of the Japanese semiconductor industry?
ST releases price increase notice

Subscribe SemiMedia

Please check your E-mail to confirm the subscribtion.

Related posts

Intel shifts foundry focus to 14A process

Intel shifts foundry focus to 14A process

July 3, 2025
0
IBM strengthens alliance with Rapidus to target sub-1nm chip technologies

IBM strengthens alliance with Rapidus to target sub-1nm chip technologies

July 3, 2025
0
Samsung delays 1.4nm production, focuses on 2nm and mature node efficiency

Samsung delays 1.4nm production, focuses on 2nm and mature node efficiency

July 3, 2025
0
TrendForce sees possible pullback in DDR4 prices in Q4

TrendForce sees possible pullback in DDR4 prices in Q4

July 2, 2025
0
Copyright © 2017-2025 SemiMedia. Designed by nicetheme.
  • Please set up your first menu at [Admin -> Appearance -> Menus]
  • electronic components news
  • Electronic components supplier
  • Electronic parts supplier
  • Infineon
  • Electronic component news
  • Renesas
  • Vishay
  • STMicroelectronics
  • NXP
  • TDK

SemiMediaEdit

Administrator